Does Abricos Glass replace commercial storefront glass in Denver?
+
Yes. Broken, damaged, scratched, outdated, or failed storefront glass can often be replaced within an existing aluminum frame if the frame condition, glazing pocket, glass thickness, safety-glazing requirements, tint, coating, and access allow. A site review is normally required before final glass is ordered.
Can you replace fogged or failed insulated glass units?
+
Yes. Fogged, cracked, or seal-failed insulated glass units in existing commercial frames can often be replaced without replacing the frame. IGU scope depends on overall thickness, spacer type, glazing pocket, edgework, tint, and coating.
Can you reuse existing aluminum storefront frames?
+
Possibly. Existing frames should be reviewed for damage, corrosion, movement, drainage, glazing-pocket dimensions, missing components, failed joints, and compatibility with replacement glass or doors.
Do you install commercial entrance doors?
+
Yes. Abricos Glass installs commercial glass entrance doors including framed narrow-, medium-, and wide-stile aluminum doors, all-glass doors with patch fittings, and paired entrance assemblies within selected storefront systems.
Do you coordinate commercial door hardware?
+
Yes. Abricos Glass can coordinate glazing, door preparation, and compatible hardware with the project's access-control and electrical contractors when included in the approved scope. Licensed low-voltage or electrical work is completed by qualified trades.
Do you install automatic sliding or swing operators?
+
Automatic-door operators, sensors, and related electrical work require specialty certification and are typically completed by qualified automatic-door contractors. Abricos Glass will note when a project requires that scope and coordinate accordingly.
Do you work from architectural plans?
+
Yes. Plans, storefront elevations, door schedules, hardware schedules, specifications, finish schedules, and reflected ceiling plans can be used for initial estimating. Final custom fabrication dimensions typically still require field verification.
Do you bid tenant improvement glazing projects?
+
Yes. Abricos Glass bids commercial tenant improvement projects. Send drawings, specifications, the bid deadline, the project address, and any special conditions.
What information do you need for a commercial quote?
+
Send architectural plans, storefront elevations, door and hardware schedules, specifications, finish requirements, project address, bid deadline, construction schedule, required alternates, and any relevant site or contract requirements.
How much do commercial storefront doors and glass cost?
+
Pricing depends on the system, opening dimensions, glass type, door style, hardware, finish, quantity, access, existing conditions, and construction schedule. Abricos Glass prepares project-specific pricing after reviewing plans or field conditions.
What affects commercial glazing cost?
+
Common cost factors include system type, glass thickness and coatings, safety-glazing requirements, door hardware, custom finishes, opening count, access, replacement complexity, work-hour restrictions, and coordination with other trades.
When is a site visit required?
+
A site visit is normally recommended for replacement projects, existing buildings with concealed conditions, and any project where final custom glass or framing must be ordered from verified dimensions.
What conditions must be ready before final measurement?
+
Rough openings, structural support, floor elevations, threshold and sill conditions, adjacent framing, and any construction that affects the opening should be complete and will not change after measurement. See the readiness checklist above.
Do you replace broken glass in commercial doors?
+
Yes. Damaged tempered or laminated glass in existing commercial door leaves can often be replaced. Feasibility depends on door construction, glass stops, retainer profiles, safety-glazing requirements, and the availability of a compatible replacement product.
What causes water leakage around commercial storefronts?
+
Water around a commercial storefront does not always originate from the glass itself. Possible sources include failed perimeter sealant, blocked weep holes, damaged gaskets, loose glass stops, improper sill conditions, thresholds, missing sweeps, roof or wall leakage above the opening, exterior cladding, flashing defects, or building movement.
Will replacing the glass stop a leak?
+
Not necessarily. Glass replacement alone cannot be guaranteed to stop water infiltration unless the actual source has been identified and included in the repair scope. Specialized building-envelope investigation may require separate qualified professionals.
What is a safety glazing label?
+
Safety glazing products such as tempered and laminated glass carry a permanent label identifying the manufacturer, standard, and product type. Labels are typically required for door glass, sidelites, low-level glazing, and other hazardous locations.
What is the difference between tempered and laminated glass?
+
Tempered glass is heat-treated to increase strength and break into smaller pieces when damaged. Laminated glass uses an interlayer that helps hold broken pieces together. Each product has different performance characteristics, and the appropriate choice depends on the application.
Do you install fire-rated glass or fire-rated doors?
+
Fire-rated glazing and fire-rated door assemblies require certified systems, listed components, and specific installation practices. Abricos Glass will note when a project requires that scope so it can be planned appropriately with qualified sources.
Do you provide ballistic, blast-resistant, or hurricane-rated glazing?
+
Standard tempered or laminated glass should not be described as ballistic, blast-resistant, or hurricane-rated unless the complete tested system supports that claim. Abricos Glass focuses on commercial storefront, entrance, window, and IGU work rather than specialty security or impact glazing.
What is U-factor?
+
U-factor describes heat transfer through a window or glazing assembly. Lower values generally indicate reduced heat transfer, but the applicable value depends on the complete product and test information.
What is Solar Heat Gain Coefficient (SHGC)?
+
Solar heat gain coefficient describes how much solar heat enters through the glazing. The appropriate level depends on orientation, climate, shading, glass area, interior use, and design goals.
Do Low-E coatings improve energy performance?
+
Low-E coatings can influence thermal and solar performance. Different coating types have different appearance, reflectivity, color, and performance characteristics. Actual performance depends on the complete window or storefront assembly, not one glass label alone.
Do commercial projects require permits?
+
Permit requirements depend on the jurisdiction, project scope, change of opening, structural work, doors, accessibility, occupancy, egress, electrical coordination, and other factors. The owner or responsible contractor should confirm requirements with the applicable authority.
Can I send photographs instead of plans?
+
Photographs and approximate measurements can be useful for an initial discussion, but final commercial pricing or fabrication dimensions may require plans, a site visit, or verified field measurements.
Can you replace multiple failed windows across a commercial building?
+
Yes. A coordinated replacement program may be considered for multiple insulated glass units or commercial windows. An opening schedule, photographs, glass information, access conditions, and unit quantities help with planning and pricing.
Can you match an existing storefront finish?
+
Available aluminum finishes may include clear anodized, dark bronze anodized, black, painted, or other manufacturer options. Exact matching of aged or discontinued finishes may not be possible, so samples should be reviewed where appearance is critical.
What areas do you serve?
+
Abricos Glass serves Denver and surrounding Colorado communities. Projects outside the immediate metro area may also be considered depending on scope, access, schedule, and location. Include the complete address with the inquiry.
Do you provide emergency board-up or after-hours service?
+
Regular business hours are Monday through Friday, 8:00 AM to 8:00 PM, and Saturday, 9:00 AM to 5:00 PM. Sunday we are closed. Availability outside those hours depends on scope, staffing, and materials. Contact us directly to discuss urgent damaged-glass requests.
How do I request a commercial quote?
+
Use the commercial inquiry form on this page, email support@abricosglass.com, or call (720) 772-8327. For faster review, include architectural plans, photographs, opening dimensions, project address, and the requested installation date.
